88° -
|
Only on request
Blade 15 mm
Blade 25 mm
|
|
Bending of closed and high U-profiles
The unique tool form of the L.B.P. tool - Long Board Punch enables the bending of closed and high U-profiles, which are not produced with conventional "goat foot die". The blade, which can be used in two different strengths, can be folded for ease of removal of the profiles sideways pulled out of the holder. A high stability of the Long Board Punch tool is guaranteed by the rectangular cross-section blades.
- Allows the bending of closed profiles
- Optimized for production of hollow sections or high U-profiles
- Easy handling
- Two different strengths blades are used in the holder
- High stability due to rectangular cross-section blade
15 mm blade | 25 mm blade | |
---|---|---|
Max. Bending length | 165 mm - 310 mm depends on material type and thickness | 225 mm - 355 mm depends on material type and thickness |
Material type and thickness | Mild steel 2,0 mm, Stainless steel 1,5 mm, Aluminium 3,0 mm | Mild steel 2,5 mm, Stainless steel 1,5 mm, Aluminium 3,0 mm |
Max. load | 250 kN/m | 400 kN/m |
Blade dimension (L x W x H) | 515 mm x 15 mm x 80 mm | 515 mm x 25 mm x 80 mm |
Angle | 88° | 88° |
Radius | R = 0.2 mm | R = 0.2 mm |
Weight | approx. 16 kg | approx. 18 kg |